
Monforts Stenter Machine Clip
An adjacent edge-grip part for Monforts finishing-machine work.
Open clip pageSTENTER MACHINE BRUSH / EDGE-CONTACT SPARE PART
Machine fit, bristle choice, and mounting details
For teams sourcing industrial textile equipment replacement parts, this brush wheel helps press fabric edges onto pin plates or clips during heat-setting. The ferarro stenter machine brush brief should be checked against brand, wheel size, bristle type, and inner-ring mounting.
Natural pig bristle, common 120mm-240mm outer diameter, 16mm-23mm thickness, and several stenter-brand options give maintenance teams a practical starting point for replacement checks.

Use the part itself and the machine interface together. A close-looking brush is not enough if the ring, thickness, or bristle choice does not fit the line.
Confirm whether your line is Artos/Ferraro, Monforts, Bruckner, IL Sung/EHWHA, LK/Lichen, or another stenter brand.
Describe where the wheel runs and whether it presses fabric edges onto pin plates or clips during heat-setting.
Use the common 120mm-240mm OD and 16mm-23mm thickness ranges as a starting point, then send actual measurements.
Photograph the notches or tabs that lock into the drive assembly so the replacement can be checked against the machine interface.
Review the product image alongside the fit details that matter most for replacement work.

The brush wheel helps keep fabric edges flat and under proper tension as the stenter line carries material through heat-setting and finishing.
| Product | Artos/Ferraro stenter machine brush wheel with pig bristle |
|---|---|
| Body | Usually durable PP or Nylon |
| Bristle | Natural pig hair, horsehair, or heat-resistant nylon/synthetic fiber |
| Application | Press fabric edges onto pin plates or clips during heat-setting |
| Outer Diameter | Usually 120mm-240mm |
| Thickness | Generally 16mm-23mm |
| Mounting | Inner-ring notches or tabs lock into the machine drive assembly |
| Sample | Sample units can be requested for compatibility and quality testing |
Several stenter brands are covered as starting points. Use the machine name first, then confirm dimensions and the drive-ring interface.
Start here when your replacement brief is built around the Artos/Ferraro machine family.
Send the machine model and wheel measurements so the replacement can be matched to the line.
Use the same fit logic: machine identity, OD, thickness, bristle, and inner-ring details.
These real product pages cover adjacent stenter interfaces and edge-control parts.

An adjacent edge-grip part for Monforts finishing-machine work.
Open clip page
Compare a belt-format brush when the line uses a continuous brush assembly.
Open brush belt page
Review the pin-side interface that the brush wheel contacts during edge control.
Open pin plate page
Compare another edge-handling component for textile stenter and tentering machines.
Open edge uncurler pageUse these three topics to connect the brush wheel with pin plates, clips, heat-setting, and replacement compatibility.
See how edge contact relates to fabric tension and the heat-setting path before you choose a replacement.
Read the heat-setting articleClarify the difference between a compatible replacement brief and a generic stenter spare-part request.
Read the compatibility articleReview the wheel-to-edge contact role when your maintenance team is checking clips, pin plates, and fabric handling.
Read the brush-wheel articleA clear machine and part brief makes it easier to check fit before a sample or larger order.
Share the stenter brand, model, and the position where the wheel is installed.
Send outer diameter, thickness, inner-ring details, and any notches or tabs.
Note whether you need natural pig bristle, horsehair, or synthetic heat-resistant fiber.
Include installed-part photos, sample expectations, and the fabric or line condition being checked.
Six practical questions for brush-wheel replacement and compatibility checks.
It presses fabric edges onto pin plates or clips so the fabric can stay flat and under controlled tension during heat-setting and finishing.
Options are described for Monforts, Bruckner, Artos or Babcock, IL Sung or EHWHA, and LK or Lichen. Confirm the machine model, brush dimensions, and mounting details before ordering.
Available choices include natural pig hair, horsehair, and heat-resistant nylon or synthetic fibers. Natural pig bristle is suited to heat-resistant and anti-static requirements, while the final choice should follow your line conditions.
The common range shown is about 120mm to 240mm outer diameter and 16mm to 23mm thickness. Send your actual part measurements for a closer replacement check.
The inner ring uses specific notches or tabs to lock into the machine drive assembly. Photos of the inner ring and the installed part help confirm the fit.
Yes. Sample units can be provided for compatibility and quality testing before bulk orders. Share your machine brand, measurements, and test requirements.
Open the product page with your machine model, wheel measurements, and inner-ring photos ready for a practical compatibility discussion.